Clearbox
InstaCheck

Blog

UAD 3.6 is live: a checklist for your first reports

The November 2, 2026 mandate went ahead. Here is what to check on every engagement, what the new URAR asks for, and the dates still to come through June 2027.

Fannie Mae and Freddie Mac kept the date. Since November 2, 2026, new appraisals delivered to the GSEs must use UAD 3.6 and the redesigned Uniform Residential Appraisal Report (URAR). If you have not sent your first UAD 3.6 report yet, you will soon. Here is what to check before you start.

1. Confirm the format on every engagement

On September 30, 2026 the GSEs added a temporary policy exception for sellers that cannot be ready in time. Lenders using it can keep delivering UAD 2.6 reports until May 19, 2027. Appraisers do not request the exception; lenders do.

So the format is no longer a given. If a client asks for a UAD 2.6 report after November 2, that lender is relying on the exception. Confirm the format on the engagement before you go out, not after you have written the report.

2. Know what the new URAR is asking for

UAD 3.6 is more than a form update. It moves from a static form with narrative comments filling the gaps to a dynamic dataset: required fields expand or contract with the property's configuration, room count and interior characteristics. Roughly 1,000 additional data fields come with rule-based logic, and missing, incomplete or conflicting information is caught by logic checks instead of being explained away in a comment.

For interiors, that means UAD 3.6 asks for:

  • room counts by level
  • ceiling height characteristics
  • finished and unfinished areas
  • floor plan relationships

One common worry is worth clearing up: a full interior floor plan is only required when the design is atypical or functionally unusual. And UAD 3.6 does not remove professional judgment. It changes how your observations are recorded, not who makes them.

3. Capture interior data once, at the property

The fields above are easiest to get right while you are standing in the house. Measuring and noting levels, ceilings and finished areas on site, in a consistent way, beats reconstructing them from photos and notes at the desk. Our guide to ANSI Z765 and UAD 3.6 covers the measurement rules in detail.

4. Put the remaining dates in your calendar

  • March 1, 2027: UAD 2.6 reports delivered under the exception get reduced Collateral Underwriter and Loan Collateral Advisor functionality and lose representation and warranty relief.
  • May 20, 2027: the exception ends. Every new appraisal delivered to the GSEs must be UAD 3.6. May 19 is the last day to deliver a new UAD 2.6 report.
  • June 28, 2027: UAD 2.6 is retired. Resubmissions of previously delivered UAD 2.6 reports are accepted through June 27.

The full timeline, with the source lender letter, is on our UAD 3.6 deadline page.

Your first-report checklist

  1. Confirm UAD 3.6 or UAD 2.6 on the engagement letter.
  2. Plan the inspection around the interior fields: levels, room counts, ceiling heights, finished vs unfinished areas.
  3. Measure to ANSI Z765 so your areas hold up to the new logic checks.
  4. Decide whether the design is atypical enough to need a full interior floor plan.
  5. Let the logic checks do their job: fix conflicts in the data rather than explaining them in comments.

Where Clearbox helps

BoxLi uses the LiDAR on an iPhone or iPad to turn a visit into an ANSI-oriented floor plan and structured property data, so the desk reviews instead of re-keying every field. Floor plans and photos are always free, and your first UAD 3.6 scan is on us.

For more on the shift itself, read UAD 2.6 vs UAD 3.6: the structural shift for appraisers, or download the papers in our Library.

Get UAD 3.6 data from the scan, not the keyboard

BoxLi captures the interior in one LiDAR pass and hands an ANSI floor plan and structured data to your report software.